Used for material performance test under different environment, such as heat, cold, moisture, heat and moisture, mainly applied in electronics, electrical appliances, mobile phones, communications, instruments, vehicles, plastic products, metals, food, chemicals, building materials, medical, aerospace and other industries.
Model | YTH-080 | YTH-150 | YTH-225 | YTH-408 | YTH-800 | YTH-1000 |
---|---|---|---|---|---|---|
Inner chamber size W×H×D(cm) | 40×50×40 | 50×60×50 | 60×75×50 | 80×85×60 | 100×100×80 | 100×100×100 |
Exterior chamber size W×H×D(cm) | 60×172×120 | 70×174×130 | 70×172×181 | 100×182×197 | 120×197×197 | 120×197×217 |
Testing temperature range | -70℃,-60℃,-40℃,-20℃,0℃~150℃,Other temperture can be customized | |||||
Testing humidity range | 20%RH~98%RH(low humidity10%RH~98RH or 5%RH~98%RH can be customized | |||||
Temp.humi.fluctuation | ±0.3℃;±0.5%RH | |||||
Temp.humi.uniformity | ±2℃;±3%RH (empty loading after stablize for 30mins) | |||||
Temp.humi.resolution | 0.01℃;0.1%RH | |||||
Heating&cooling time ℃/min | Heat-up:3℃/min(average),cool-down:1℃/min(average) | |||||
Exterior chamber material | Cold rolled plate + Powder coating | |||||
Inner chamber material | SUS#304 Stainless steel | |||||
Insulation material | PU | |||||
Circulation system | Centrifugal fan air circulation system | |||||
Heating system | SUS# Stainless steel high-speed heater | |||||
Humidification system | Electrothermal steam humidification | |||||
Dehumidifying | ADP critical dew point cooling/ dehumidifying method | |||||
Refrigeration system | Compressor + Finned evaporator + Air(Water) cooling condenser | |||||
Controlling system | Touch screen controller | |||||
Other components | Vacuum glass observation window | |||||
Test hole (50mm) | ||||||
Control status indicator | ||||||
View light | ||||||
Compartment shelf (2 freely adjustable) | ||||||
Safety protection device | Overheat protection circuit breaker | |||||
Humidification system overheat protection | ||||||
Compressor overload protection | ||||||
Control system overload protection | ||||||
overload indicator | ||||||
Phase sequence protection | ||||||
Water shortage protection | ||||||
High voltage and low voltage protection | ||||||
Over temperature protection | ||||||
Water supply dely protection | ||||||
Fan overcurrent protection | ||||||
Power supply | AC 1ψ 220V; 3ψ380V 60/50Hz | |||||
Customization service | No-standard or special requirements are all welcome |