80L temperature humidity test chamber is mainly and widely used for various types of testings for material / product quality control, such as prototype evaluation, research & development testing, production quality control testing, accelerated stress testing, reliability testing, failure analysis, and any other application where environmental simulation is needed.
1. Programmable Controller with RS232C, 7'' LCD touch screen controller.
2. Stainess steel Interior, galvanized steel sheet exterior.
3. 2pcs stainless steel loading shelves free.
4. Multipane detection viewing window with heater to avoid fog.
5. 60mm diameter feed-through port.
6. Floor stand with castors.
Model | YTH-080 | YTH-150 | YTH-225 | YTH-408 | YTH-800 | YTH-1000 | ||
Internal Dim.W×H×D(mm) | 400×500×400 | 500×600×500 | 500×750×600 | 600×850×800 | 1000×1000×800 | 1000×1000×1000 | ||
External Dim.W×H×D(mm) | 900×1350×950 | 950×1500×1050 | 950×1650×1150 | 1050×1750×1350 | 1450×1900×1350 | 1450×1900×1550 | ||
Temperature Range | -70ºC-60ºC,-40ºC,-20ºC,0ºC~+150ºC,+180ºC | |||||||
Humidity Range | 20%HR ~98%HR | |||||||
Performance | Temp.&Humi accuracy | ±0.2ºC(1p), ±0.3ºC(2p);±2.5%RH(1p),±3.0%ºC(2p) | ||||||
Temp.&Humi regularity | ±1.5ºC,±3.0%RH | |||||||
Indication Resolution | 0.01ºC,0.01%RH | |||||||
Heat up time (20ºC~HT) | ºC | 100 150 | 100 150 | 100 150 | 100 150 | 100 150 | 100 150 | |
min | 30 40 | 30 40 | 30 45 | 30 45 | 30 45 | 30 45 | ||
Heat down time(20ºC~HT) | ºC | 0 -20 -40 -60 -70 | 0 -20 -40 -60 -70 | 0 -20 -40 -60 -70 | 0 -20 -40 -60 -70 | 0 -20 -40 -60 -70 | 0 -20 -40 -60 -70 | |
min | 25 40 50 80 90 | 25 40 50 80 90 | 25 40 50 80 90 | 25 40 55 80 90 | 25 40 75 85 90 | 25 40 85 95 100 | ||
Material | Exterior | Stainless steel plate+Powder Coated | ||||||
Interior | SUS#304 stainless steel plate | |||||||
Insulation | PU & Fiberglass wool | |||||||
Systems | Circulation | Sirocco fan | ||||||
Heating | SUS#304 stainless steel high-speed heater | |||||||
Humidifying | Surface evaporating system | |||||||
Cooling | Airtight compressor+vaporator fins+air-cooling condenser | |||||||
Dehumidifying | ADP Critical dewpoint cooling/dehumidifying method | |||||||
Controller | Digital electronic indicatrs+S.S.R.With PID automatic calculation capabilty | |||||||
Accessories | Viewing window, Shelves (freely adjustable 2 pcs.), Cable port(Ø60mm)Chamber lamp. | |||||||
Safety devices | No fuse breaker refrigerator over load relay, Refrigeration High pressure Switch, Over Temp, Protector, Protection relay, Protection fuse, Water Lever protector, Overheat protector, Alarm | |||||||
Power(K.W.) | AC 1Ψ 220V,3Ψ380V 60/50Hz |