3 zones thermal shock chamber is used to test the performance of material or products by instant shock under continuous conditions of extremely high temperature and low temperature. It is applied in electrical and electronic components, automation components, communication components, auto parts, metals, chemical materials, plastics, etc.
| Model | YTST-050 | YTST-080 | YTST-108 | YTST-216 | YTST-252 |
|---|---|---|---|---|---|
| Test zone size W×H×D (cm) | 40×35×36 | 50×40×40 | 60×40×45 | 60×60×60 | 60×70×60 |
| External chamber size W×H×D (cm) | 120×182×150 | 143×195×160 | 151×185×185 | 151×205×200 | 151×215×200 |
| Hot zone temp. range | +80℃～+200℃ | ||||
| Cold zone temp range | -10℃～-40℃，-10℃～-60℃，-10℃～-70℃ | ||||
| Test zone temp. range | -40℃～+150℃，-55℃～+150℃，-60℃～+150℃ | ||||
| Temp. fluctuation | ±2℃ | ||||
| Temp. recovery time | <5min | ||||
| Exterior material | Painted steel | ||||
| Internal tank | Stainless steel plant #304 | ||||
| Insulation | PU+Fiberglass wool | ||||
| Heating system | Stainelss steel high temp. heater | ||||
| Cooling system | Compressor + Finned evaporator + Air(Water) cooled condenser | ||||
| Controller | Touch LCD ++ SSR + PID | ||||
| Accessories |
Vacuum glass observation window Power test hole (50mm) Control status indicator Interior light Load shelf (2 freely adjustable) |
||||
| Protection |
Overheat protection circuit breaker Compressor overload protection Control system overload protection Overload indicator Phase sequence protection High voltage and low voltage protection Over temperature protection Fan overcurrent protection |
||||
| Power supply | AC 3Ψ380V 60/50Hz | ||||
| Customization | Special requirements, custom service | ||||
