Model |
YTH-080 |
YTH-150 |
YTH-225 |
YTH-408 |
YTH-800 |
YTH-1000 |
Inner chamber size W×H×D(cm) |
40×50×50 |
50×60×50 |
50×75×50 |
80×85×60 |
100×100×80 |
100×100×100 |
Exterior chamber size W×H×D(cm) |
60×172×120 |
70×174×130 |
70×172×181 |
100×182×197 |
120×197×197 |
120×197×217 |
Testing temperature range |
-70ºC,-60ºC,-40ºC,-20ºC,0ºC~150ºC,Other temperature can be customized |
Testing humidity range |
20%RH~98%RH(Low humidity 10%RH~98%RH or 5%RH can be customized) |
Temp.humi.fluctuation |
±0.3ºC;±0.5%RH |
Temp.humi.uniformity |
±2ºC;±3% empty loading after stablize for 30mins ±2ºC;±3%RH |
Temp.humi.resolution |
0.01ºC;0.1%RH |
Heating&cooling time ºC/min |
Heat-up:3ºC/min(average),cool-down:1ºC/min(average) |
Exterior chamber material |
Cold rolled plate + Powder coating |
Interior chamber material |
SUS#304 Stainless steel |
Insulation material |
PU |
Circulation system |
Centrifugal fan air circulation system |
Heating system |
SUS# Stainless steel high-speed heater |
Humidification system |
Electrothermal steam humidification |
Dehumidifying |
ADP critical dew point cooling / dehumidifying method |
Refrigeration system |
Compressor + Finned evaporator + Air(Water) cooling condenser |
Controlling system |
Touch screen controller |
Other components |
Vacuum glass observation window |
Test hole(50mm) |
Controller status indicator |
View light |
Compartment shelf (2 freely adjustable) |
Safety protection device |
Overheat protection circuit breaker |
Humidification system overheat protection |
Compressor overload protection |
Control system overload protection |
overload indicator |
Phase sequence protection |
Water shortage protection |
High voltage and low voltage protection |
Over temperature protection |
Water supply delay protection |
Fan overcurrent protection |
Power supply |
AC 1ψ220V;3ψ380V 60/50Hz |
Customization service |
Non-standard or special requirements are all welcome |