Model | YCTL-080 | YCTL-150 | YCTL-225 | YCTL-408 | YCTL-800 | YCTL-1000 |
---|---|---|---|---|---|---|
Inner chamber size W×H×D (cm) | 40×50×40 | 50×60×50 | 60×75×50 | 80×85×60 | 100×100×80 | 100×100×100 |
Exterior chamber size W×H×D (cm) | 60x172x120 | 70×173×130 | 80×172×154 | 100×182×161 | 120×190×180 | 120×190×200 |
Test temp.range | -60℃~150℃ | |||||
Temp.fluctuation | ±0.5℃( RP) | |||||
Temp.uniformity | ±2.0℃( RP) | |||||
Heating time | 3℃/min(+20℃~+150℃、RP、empty load) | |||||
Cooling time | 1℃/min | |||||
Pressure range | (RP)~0.5KPa | |||||
Pressure control error | ±0.2kPa(≤2kPa时),±2(2kPa~40kPa时),±5%(≥40kPa时) | |||||
Depressurization time | ≤45min | |||||
Exterior chamber material | Stainless steel plate+Powder coating | |||||
Inner chamber material | SUS#304 stainless steel plate | |||||
Insulation material | Fiberglass wool | |||||
Air circulation system | Centrifugal fan | |||||
Heating system | SUS#stainless steel high speed heater | |||||
Cooling system | APD critical dew point cooling/desiccant method | |||||
Components | Sample shelves 2pcs, electronical wire 1pcs(3m), pressure test port | |||||
Safety protection device |
Overheat protection circuit breaker Compressor overload protection Control system overload protection Overload indicator Phase sequence protection High voltage and low voltage protection Over temperature protection Fan overcurrent protection |
|||||
Power supply | AC 3Ψ380V 60/50Hz | |||||
Customization service | Non-standard or special requirements are welcomed and available. |